Profiline HyperCoat Wet Sealant + Drying Aid

HyperCoat is the step that turns the last rinse into a protection step. After washing and rinsing, dilute it 1:100 to 1:200 (roughly 5–10 ml per litre of water), spray the diluted solution over the wet vehicle panel by panel, then high-pressure rinse immediately — do not let it dry on the surface. Water breaks instantly into tight beads and sheets off, so there is far less to towel, drying towels and blowers glide instead of dragging, and the finish comes up glossy and slick with no streaking.

At that dilution a single 1 L bottle makes up to about 200 litres of working solution, which is why it suits high-volume wash bays and mobile rigs as much as a home garage. It is safe across gloss and matte paint, ceramic coatings, PPF, vinyl wraps, exterior trim, wheels and glass, and it works equally well as a standalone sealant, a drying aid, or a topper to refresh an existing coating or wax without build-up.

Do not apply in direct sunlight or on hot panels. Sonax article number 677300. Stocked in 1 L at the Seaside counter.