Xtreme Spray + Seal

The fastest protection step in the wash bay: spray it on the wet car, rinse it off, dry, done. No applicator pads, no cure time, no buffing — a full vehicle takes roughly five minutes at the end of a maintenance wash. It leaves a genuinely water- and dirt-repellent surface, so water beads and sheets off, drying is quicker and the risk of water spots drops sharply.

It also deepens colour and brings back gloss and slickness, which makes it an easy way to refresh an existing sealant or maintain a ceramic coating between full details. Beyond paint, it is safe on chrome, plastic trim, seals, door jambs and body seams, and it is suitable for matte paint. To use: wash and rinse the vehicle thoroughly, shake the bottle and open the nozzle, spray roughly four to six pumps per four-square-foot section onto the still-wet surface, then rinse immediately with plenty of clean water and dry the car completely — buff off any residue with a microfiber towel.

From the 5 L Profiline canister, shake before use, pour into a sprayer and apply the same way; consumption runs about 50–100 ml per vehicle, which is why high-volume bays buy the canister.

Do not use on hot panels or let it dry on the surface, and protect it from frost. Sonax article numbers 243400 (750 ml) and 02435000 (5 L). Stocked in both sizes at the Seaside counter.